
Cooling two, three or four rooms in a London flat or house? BritOne Air covers multi-room projects with individual R32 single split systems — one condenser per room, sized 9,000 to 24,000 BTU, each with its own controls, warranty and livery. We deliberately spec room-by-room rather than one shared multi-split condenser: if one system needs a service, every other room keeps running, and each occupant controls their own temperature without arguing over a shared compressor.
Fully qualified engineers with years of experience
We respect your home and leave it spotless
We only install premium AC brands
3 years parts & labour + 2 years parts
Qualifying residential air conditioning installations in the UK are eligible for 0% VAT until 31 March 2027, provided the system works as a reverse-cycle air-to-air heat pump supplying both heating and cooling. The relief covers the equipment and the labour when they are bought together, and we apply it automatically on your quote where your installation qualifies.
The installation must be in a domestic building — a house, flat or bungalow that you live in.
A permanently fixed split system or air-to-air heat pump that provides both heating and cooling.
Unit and installation bought together from a VAT-registered contractor. Buying the unit on its own is charged at 20% VAT.
The 0% rate ends on 31 March 2027, after which it reverts to the reduced 5% rate.
VAT treatment depends on your property and the system specified. We confirm the applicable rate in writing on your final quote following survey.
Everything for a professional air conditioning installation from one supplier — stocked in our own warehouse, priced for trade, open to the public.

R32 A++ inverter systems from 9,000 to 24,000 BTU, plus multi split and commercial ranges. Buy the unit on its own or with fixed-price installation in London.
Shop AC units
Refrigeration copper, Class-0 lagging, trunking in white and black, brackets, anti-vibration feet, condensate pumps, isolators and interconnect cable — all on one order.
Shop accessories
Vacuum pumps, manifold gauges, flaring and swaging kits, torque spanners, nitrogen regulators and leak detectors — stocked at our Chertsey trade counter for same-day collection.
Browse the shopRoom-by-room single splits are simpler to commission, cheaper to fault-find and easier to phase — do the master bedroom now, the lounge next month, on the same pre-order pricing. Each unit carries its own British livery choice, so a rear façade with three condensers still reads as one design language.
R32 refrigerant · A++ inverter · Wi-Fi ready · 22 dB(A). Trade price ex-VAT for approved accounts; RRP is the published retail price. Explore the full full air conditioning range or browse every SKU in the shop.
Wall-mounted systems for one room — 9k to 24k BTU, R32, A++ inverter.




One condenser, several indoor units — 2 way through 5 way systems.




Ceiling cassettes for offices, retail and hospitality — four-way airflow.




Copper, insulation, brackets, pumps, isolators, trunking and cable — invoiced on the same order as the AC units. That's the whole point of BritOne Air for London installers: one basket, one delivery, one paper trail per job. See the full installation materials catalogue.

6.35 & 9.52 mm annealed refrigeration copper, insulated pair coils in 3–25 m.

Class-0 closed-cell insulation and armaflex sleeves for indoor and outdoor runs.

80×60 and 100×75 mm trunking, corners and joints — clean external runs on any facade.

Powder-coated wall brackets and anti-vibration rubber feet for outdoor condensers.

Corner-joint and inline duct condensate pumps — silent, tested, F-Gas approved.

20A rotary isolators, IP65 rated — dropped into every installation kit as standard.

4-core 1.5 mm² interconnect cable in 25 m and 50 m drums — pre-cut lengths on request.

Roof-mount frames, drip trays and drain fittings — everything to finish the outdoor side.
Multi-room orders ship as one consignment — every unit, plus copper, trunking, brackets, isolators and pumps for all rooms — next working day across London on orders before 3pm. Units are pre-order for the 14 September 2026 stock arrival with a 20% deposit.
London service questions
Straight answers on every service we run in London, each linked to the page that covers it in full — delivery, trade pricing, stock and installation.
Split air conditioning units are stocked for London in 9,000, 12,000, 18,000 and 24,000 BTU — R32 refrigerant, A++ inverter, Wi-Fi ready and 22 dB(A). Standard BritOne Air logo livery is included; a custom British livery adds £380 + VAT. The dedicated London page lists capacities, room sizing and pricing side by side. Order by 3pm and stocked items dispatch the same working day for next-working-day delivery across Greater London.
Split air conditioning units in LondonInstallers, merchants, distributors and property developers across London — apply once, order forever. Live price list, net-30 on approval, dropship to your site.
Not currently. We supply multi-room projects as individual single split systems — one outdoor unit per room — which keeps servicing, controls and warranties independent.
Every outdoor unit is powder-coated and UV-stable. The standard logo finish is included in the unit price; any custom printed livery is £380 + VAT. Pick a finish below, then configure capacity and installation materials on the product page.

London homeowners and installers order online for next-working-day delivery, or collect the same day from Unit 1, Warren Yard Business Park, Lyne Lane, Chertsey KT16 0AW. Fixed-price installation by our own F-Gas certified teams from £1650 + VAT, with every standard installation material included.
Every BritOne Air condenser landing in London wears a piece of Britain — from Tower Bridge navy to White Cliffs matte black.






















